Pc software for zq-520

Records are added until the 5, record limit is reached. If the total goes over 5, records and a record can not be added, the synchronization is aborted and the program performs the following operations: Skips to the results dialog, displays an appropriate message i.

Maximum number of entries reached in PC , and displays the record that failed to be added. For example, if a new Outlook Contact had no name, then the record added to the PC Software during synchronization would have a space in its Name field.

If you have a password set you may be prompted several times during the synchronization process to enter a password. To avoid this problem, please check the 'Save the password in your password list' option before pressing 'OK'. NOTE: After synchronization is complete, remember to uncheck this box so that your Outlook data is locked again. The exact procedure for doing this will vary depending upon the version of Outlook you are using, and its installation configuration.

You should check your Outlook online Help or reference manual for details on how to perform this operation. If the PC Software Number field contains more than one line of data, only the first line of data is used for synchronization purposes. If there is more than one line of E-mail information in the PC Software, then the first line of data is mapped to the E-mail field in Outlook. Contact Support.

Drivers ZDesigner v. Download cradle driver instructions. Firmware V Unrestricted With Login. A Download 2 MB. Knowledge Articles.

Visit the Support Community for access to Zebra's complete knowledge base. Search Knowledge Base. Looking for Broader Support?

Reach out for immediate support today. Find a Partner. Open a Case. Discussion Forum. Warranty Lookup. Product Warranty Information.

Printer Software License Reset. Manage Software Licensing excluding Printers. Device Diagnostic Tool for Mobile Devices. Find a Zebra Partner. Mobile Computers. Barcode Scanners. Typically the slower the print speeds used, the lower your darkness setting can be. The higher the print speed, the higher your darkness will need to be set. In general, slower print speeds yield better print quality. Print Darkness also may be referred to as Density or Burn Temperature is a user-adjustable setting.

You can also use a setup utility or the printer driver if available to set the print darkness. Darkness set too low will yield poor-quality print, while setting it too high may cause blotchy print or bleeding of the ink within the print. Vary the darkness to produce the best print quality. Install a Zebra compatible driver before connecting the printer. The serial communication port on the printer is RSC, all parameters must match on the printer and host.

Communication Ports. You then have to use either our Zebra Setup Utilities or ZebraNet Bridge Enterprise software to configure the printer for your network. Zebra Bluetooth printers are 'peripheral devices and the 'central' device must initiate the connection. The printers by default should be set to discoverable and without a PIN. If you have issues pairing with the device or wish to set a PIN or friendly name for the device, you can use our Zebra Setup Utilities.

When connecting to a Windows PC, you must first add or discover the Bluetooth device and then install a driver for the printer so you can specify the appropriate COM port to allow for communication. All printer settings can be impacted by commands from a mismatched or misconfigured driver or software application. A printer functioning correctly after setup but fails or indicates an error after label requests are received, most likely affected by the host side misconfiguration of the driver or printer software settings.

Typically, the host device that generates the printer commands for printing has a setup configuration that sends these as commands to the printer.